NEW NAGOYA 200W HF Power Amplifier FM- AM-CW-SSB For 3-30MHz Handheld Ham Radio

  

The most effective working frequency is 20-30 MHz, and with the situations of working under. Around 200 W with input 5 W and around 200-250 when the input is 10W. Dear customer, if you want to reach the PE MAX output, please check that the input should exactly 10W or 5W. The DC Power should actually be over 14V and 18A and also other conditions should be perfect.

However, we do not suggest to work the PE Max for a long time, it will decrease the amp' life time and also if the antenna can not endure the output watt, which will damage the amp, thank you very much! Max 150 W(Input 10W). Max 300 W(Input 10W). Compact high power all mode amplifier with automatic TX/Rx switch and On/Off switch. Something New and impirtance about the Updated Version.

Why did we decide to design a "Fan" on the amplifier? During the programming of investigating regular customers of the amplifier, over two thirds of the customers leave the mssage that they need to put a additonal fan to cool the amplifier when it is working. They think sometimes, when a fan is not availabel, it will get much more business. Also, considering that the high degree of heat dissipation will affect the amp's working efficiency, our engineers decided to put a fan on the amplifier.

It does greatly ease the problem. Why chose such a " loud voice " fan to put on the amp.

Dear friend, if it is that at the first, we got two kinds of the fans to consider ---- one is with lower noise and cost but just with lower rotate speed, while another one is with a louder noise and higher cost, but it works more perfectly and feectively with hiher rotate speed. So, we choose the later one, although the noise is louder but it does work well with the heat dissipation.

The item "NEW NAGOYA 200W HF Power Amplifier FM- AM-CW-SSB For 3-30MHz Handheld Ham Radio" is in sale since Wednesday, April 15, 2020. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Amplifiers". The seller is "walkietalkie64" and is located in QuanzhouFujian.

This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Model: NA-300N
• Band: 3-30MHz
• Type: NAGOYA 300N
• Color: Black
• MPN: Does Not Apply
• Brand: NAGOYA
• Country/Region of Manufacture: China
• Something inportant about the PEP Max: All the working conditions should be perfect.

• It is not suggested to wokr with PEP MAX: because it wil derease the woking lifetime
• Bundle Listing: Yes
• Max. Output Power: 150W/250W/300W
• Supported Modes: AM
• Working bellow 20MHz: both the swr and heat dissipation will be higher
• FM/AM Output power: Usual(70-100 W);PEP Max(150W)
• Used for: portable CB radio
• DC Power: At least should be 13.8Vcc,14-20 A
• CB Radio input power for FM/AM/CW: 3-5 W
• CB Radio input power for SSB: 2-10 W
• SSB Output power: Usual(120-250 W);PEP Max(250W or 300W)
• Diffrent input power for SSB 300W & 250W: respectively 10w and 5w
• Power: 200W