1.2 KW LDMOS power amplifier boards 1.8-54MHz HF BLF188XR BLF578 MRF1K50 MRF1K8

  
1.2 KW LDMOS 1.8 - 54MHz power amplifier board assembled. The board consists of two parts and may accept different types of LDMOS transistors, but optimized for BLF188XR, BLF578, MRF1K50, MRF1K8. The board is double sided FR4 with 50 um copper thickness. All components are installed except the LDMOS device. You must use your own. Solder transistor to copper plate or use the Liquid Pro metal thermal interface.

Amplifier has -4 dB attenuator on input for better impedance matching and increasing the driving power for about 2W at 1000W output. A temperature regulated bias circuit and a high power low loss wide band transmission line type transformer are used in amplifier.

PCB Size: 37 x 100 mm input and 67 x 100 mm output. Drain voltage: 50 - 60V Drain current : 35A max Idq: depends of LDMOS used according to datasheet, 1A suggested for BLF188XR.

Copper spreader plate does not need to be milled for transistor installation. The item "1.2 KW LDMOS power amplifier boards 1.8-54MHz HF BLF188XR BLF578 MRF1K50 MRF1K8" is in sale since Tuesday, December 24, 2019. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Amplifiers".

The seller is "r3kbo4" and is located in Voronezh. This item can be shipped worldwide.

• Country/Region of Manufacture: Russian Federation
• Band: AM
• Supported Modes: AM
• MPN: Does Not Apply
• Brand: Unbranded