RF power output: 1000W typical, 1200W max. 1.8-35MHz; 700W typical, 900W max. Modes Supported : FM, CW, SSB and others. RF power input: 7W typical, 10W max.Board dimensions: 163 x 120 mm. BIAS adjusted in accordance with temperature. Vbias: 12V for keying the amplifier. Additional elements for AFC correction.
Input VSWR is optimized with attenuator on PA input. The heat sink and a copper heat spreader (not supplied) have to be larger than 200mm x 140mm and proper fan cooling must be provided too.If you want to get 1000W Pout, you need very low input power, about 3-5W Pin. In this order, you need to be very carefully on first power on. On 160m, 80m, 40m, 30m, 12m, 10m can be Pout up to 1200W. On 50MHz can be Pout up to 900W.
On 70MHz can be Pout up to 700W. To increase the gain at frequencies of 30-70 MHz is possible by changing the values of capacitors C21, C11, C48. A full technical documents with all instructions on CD (in parcel) is provided with the board.The item "1kW 1.5-30MHz 700W 50MHz HF POWER AMPLIFIER BOARD for LDMOS BLF188XR/XRS BLF188" is in sale since Thursday, November 18, 2021. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Amplifiers". The seller is "dnradio" and is located in Europa.
This item can be shipped worldwide.