3GHz-3.7GHz 2.3-3.8W Microwave Power Amplifier RF Power Amp 3000MHZ-3700MHZ Module with Metal Shell Description: This amplifier module is mainly used for scientific research. It adopts CNC aluminum alloy shell, feed-through capacitor feed and gold-plated SMA interface. In addition, its core adopts a grade 3 gallium arsenide FET microstrip matching network, which is costly. But its stability and reliability are guaranteed. The final stage of the amplifier has a ring device, which adds a lot of cost, but the stability between stages is quite good.Most importantly, it avoids the explosion caused by users forgetting to connect the load or antenna when it is powered on. Because of its built-in isolator, it is very suitable for final amplification and GaN FET driven amplification. When driving the final amplifier, it will not lead to self-excitation caused by the mismatch of the final stage. Specifications: - Operating frequency: 3000MHz-3700MHz (3GHz-3.7GHz) - Input power: +5dBm - Output power: 33.8dBm 2.4W at 3000MHZ; 35dBm 3.2W at 3100MHZ; 35.8dBm 3.8W at 3200MHZ; 35.6dBm 3.6W at 3300MHZ; 35.4dBm 3.5W at 3400MHZ; 34.6dBm 2.9W at 3500MHZ; 34dBm 2.5W at 3600MHZ; 33.6dBm 2.3W at 3700MHZ - Gain: 34dB (±1dB in-band spectrum ripple) - Power supply: +12V/2.5A - Dimensions: 135 x 50 x 19mm/5.3 x 2 x 0.7 Package Included: - 1 x Microwave Amplifier. Usually it costs about 30USD-50USD. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Signal Sources & Conditioning\RF & Microwave Amplifiers". The seller is "pincei_de" and is located in this country: CN. This item can be shipped worldwide.